LIHAI ZHANG

Publications

• Reliability-Based Decision Support Framework for Major Changes to Social Infrastructure PPP Contracts
• New polymer composites improve silty‐clay soil microstructure as evaluated by NMR
• Reliability analysis for multiple-stage solid waste management systems
• Reliability Analysis of Bus Timetabling Strategy during the COVID-19 Epidemic: A Case Study of Yixing, China
• Impermeability and interfacial bonding strength of TiO2-graphene modified epoxy resin coated OPC concrete
• Balance Between Mechanical Stability and Mechano-Biology of Fracture Healing Under Volar Locking Plate
• Evaluation of flexural resistance of compression yielded concrete beams reinforced with fibre reinforced polymers
• Optimal time-dependent levels of weight-bearing for bone fracture healing under Ilizarov circular fixators
• Prediction of lubrication layer properties of pumped concrete based on flow induced particle migration
• Mechanical and interface bonding properties of epoxy resin reinforced Portland cement repairing mortar
• The investigation of bone fracture healing under intramembranous and endochondral ossification
• Bond behavior between GFRP bars and seawater sea-sand fiber-reinforced ultra-high strength concrete
• A Simplified Methodology for Condition Assessment of Bridge Bearings Using Vibration Based Structural Health Monitoring Techniques
• Numerical prediction of the optimal shield tunneling strategy for tunnel construction in karst regions
• A Coupled Macroscopic and Mesoscopic Creep Model of Soft Marine Soil Using a Directional Probability Entropy Approach
• Preparation of TiO2/epoxy resin composite and its effect on mechanical and bonding properties of OPC mortars
• Improving Soil-Water Characteristics and Pore Structure of Silty Soil Using Nano-aqueous Polymer Stabilisers
• A novel titania/graphene composite applied in reinforcing microstructural and mechanical properties of alkali-activated slag
• Investigation of role of cartilage surface polymer brush border in lubrication of biological joints
• Automation in Structural Health Monitoring of Transport Infrastructure
• Study of soil expansion characteristics in rainfall-induced red-bed shallow landslides: Microscopic and macroscopic perspectives
• Experimental and numerical investigation of mechanical properties on novel modular connections with superimposed beams
• A Probabilistic Failure Risk Approach to The Problem of Articular Cartilage Lubrication
• Experimental and numerical studies of wind-resistance performance of twin-box girder bridges with various grid plates
• Analysis of microstructure and spatially dependent permeability of soft soil during consolidation deformation
• Life-cycle modelling of concrete cracking and reinforcement corrosion in concrete bridges: A case study
• A competency framework for construction engineering graduates: An industry perspective
• Environment Management of Hydropower Development: A Case Study
• Modeling Riverbank Slope Reinforcement Using Anti-Slide Piles with Geocells
• Degradation of Alkali-Activated Slag and Fly Ash Mortars under Different Aggressive Acid Conditions
• Managing Interfaces in Large-Scale Projects: The Roles of Formal Governance and Partnering
• Role of TNF-α in early-stage fracture healing under normal and diabetic conditions
• Mechanical and microstructural evolution of 3D printed concrete with polyethylene fiber and recycled sand at elevated temperatures
• A probabilistic approach for modelling bone fracture healing under Ilizarov circular fixator
• Synthesis, application and unique effects of RGOEP on properties of alkali-activated slag binders
• Predicting airflow in naturally ventilated double-skin facades: Theoretical analysis and modelling
• Calculation model and bearing capacity optimization method for the soil settlement between piles in geosynthetic-reinforced pile-supported embankments based on the membrane effect
• Degradation resistance of different cementitious materials to phosphoric acid attack at early stage
• Experimental and numerical investigation on the lateral force resistance of modular steel sub-frames with laminated double beam
• Compressive behavior of FRP-confined ultra-high performance concrete (UHPC) in circular columns
• A theoretical framework for optimization of three-dimensional slope stability monitoring
• Infrared thermography detection of delamination in bottom of concrete bridge decks
• Bond Behavior between GFRP Bars and High Strength and Ultra-High Strength Fiber Reinforced Seawater Sea-sand Concrete (SSC) under Pullout Loading
• Improving Design by Partnering in Engineering–Procurement–Construction (EPC) Hydropower Projects: A Case Study of a Large-Scale Hydropower Project in China
• Reliability assessment of concrete under external sulfate attack
• Mechanical and durability-related performance of graphene/epoxy resin and epoxy resin enhanced OPC mortar
• Design-oriented stress-strain model for FRP-confined ultra-high performance concrete (UHPC)
• Structural damage analysis of CRTS Ⅱ slab track with various interface models under temperature combinations
• Influence of therapeutic grip exercises induced loading rates in distal radius fracture healing with volar locking plate fixation
• The synthesis of soft rocks based on physical and mechanical properties of red mudstone
• Reliability analysis of road networks in disaster waste management
• Aerodynamic performance evaluation of different cable-stayed bridges with composite decks
• The Effects of Dynamic Loading on Bone Fracture Healing under Ilizarov Circular Fixators
• Cartilage Tissue Homeostasis
• Introduction to Articular Cartilage
• Lubrication, Friction, and Wear in Diarthrodial Joints
• A Proposed Method for the Use of the IBIS-FS in Experimental Modal Analysis of Buildings
• Aerodynamic countermeasure schemes of super long-span suspension bridges with various aspect ratios
• Robot-assisted weight-bearing exercise for stroke patients with limited mobility
• Coupled Seepage and Stress Model and Experiment Verification for Creep Behavior of Soft Rock
• Transitions between nanomechanical and continuum mechanical contacts: new insights from liquid structure
• A probabilistic-based approach for computational simulation of bone fracture healing
• Infrared Thermography for Detecting Subsurface Defects of Concrete Structures
• A comprehensive experimental-numerical investigation on the bending response of laminated double channel beams in modular buildings
• Degradation process of alkali-activated slag/fly ash and Portland cement-based pastes exposed to phosphoric acid
• The influence of ambient environmental conditions in detecting bridge concrete deck delamination using infrared thermography (IRT)
• Solar chimney in tunnel considering energy-saving and fire safety
• Constructing a novel nano-TiO2/Epoxy resin composite and its application in alkali-activated slag/fly ash pastes
• Sensitivity analysis of geometrical design parameters on the compressive strength of the vertical inner-plate reinforced square hollow section T-joints: A finite element study
• Nonlinear flutter control of a long-span closed-box girder bridge with vertical stabilizers subjected to various turbulence flows
• Bone fracture healing under Ilizarov fixator: Influence of fixator configuration, fracture geometry, and loading
• The investigation of fluid flow in cartilage contact gap
• Comprehensive Measurement Techniques and Multi-index Correlative Evaluation Approach for Structural Health Monitoring of Highway Bridges
• Osmotic Pressure, Solid Stress, and the Diffuse Double Layer
• Cartilage Tissue Dynamics
• Theory for Modeling Articular Cartilage
• A Systems Approach to Articular Cartilage
• A nonlinear numerical scheme to simulate multiple wind effects on twin-box girder suspension bridges
• Impact of Payload Spectra of Heavy Vehicles on Pavement Based on Weigh-in-Motion Data
• Nonlinear behaviors of the flutter occurrences for a twin-box girder bridge with passive countermeasures
• Effects of dynamic loading on fracture healing under different locking compression plate configurations: A finite element study
• An Innovative Acousto-optic-Sensing-Based Triaxial Testing System for Rocks
• Deformation behaviour of concrete materials under the sulfate attack
• Modeling cover-collapse sinkhole based on the theory of shells
• User testing of the psychometric properties of pictorial-based disability assessment Longshi Scale by healthcare professionals and non-professionals: a Chinese study in Shenzhen
• Interaction effect of room opening and air inlet on solar chimney performance
• Effects of grain dissolution–diffusion sliding and hydro-mechanical interaction on the creep deformation of soft rocks
• The status and challenges of replicating the mechanical properties of connective tissues using additive manufacturing
• Rheological Deformation Behavior of Soft Rocks under Combination of Compressive Pressure and Water-Softening Effects
• Structural Health Monitoring of Underground Structures in Reclamation Area Using Fiber Bragg Grating Sensors
• Investigation on True Stress-Strain Curves of Flat and Corner Regions of Cold-Formed Section Using 3D Digital Image Correlation Method
• Role of Dynamic Loading on Early Stage of Bone Fracture Healing
• Structural Health Monitoring of Bridges Using Advanced Non-destructive Testing Technique
• A coupled contact model of cartilage lubrication in the mixed-mode regime under static compression
• Influence of aggregate surface treatment on corrosion resistance of cement composite under chloride attack
• The Role of Physiological Loading on Bone Fracture Healing Under Ilizarov Circular Fixator: The Effects of Load Duration and Loading Frequency
• Flexural behaviour of pairs of laminated unequal channel beams with different interfacial connections in corner-supported modular steel buildings
• Computational study on synovial fluid flow behaviour in cartilage contact gap under osteoarthritic condition
• Relating building space to performance outcomes – A methodology to explore the relationship
• Toward the Understanding of Stress-Induced Mineral Dissolution via Molecular Scale Simulations
• Reliability analysis for disaster waste management systems
• Probabilistic modelling of forces of hail
• Articular cartilage dynamics
• Structural monitoring of Eltham rail trestle bridge using advanced nondestructive testing techniques
• A multi-reference-based mode selection approach for the implementation of NExT-ERA in modal-based damage detection
• Detecting structural damage to bridge girders using radar interferometry and computational modelling
• Risks of failure of annealed glass panels subject to point contact actions
• Financial assessment of manufacturing recycled aggregate concrete in ready-mix concrete plants
• Flutter characteristics of twin-box girder bridges with vertical central stabilizers
• Experimental studies on VIV performance and countermeasures for twin-box girder bridges with various slot width ratios
• Predicting Knee Osteoarthritis
• Computer Simulation of Contact Forces Generated by Impact
• An agent-based method for simulating porous fluid-saturated structures with indistinguishable components
• Characterization of Articular Cartilage Recovery and Its Correlation with Optical Response in the Near-Infrared Spectral Range
• Damage modelling of aluminium panels impacted by windborne debris
• The impact of technical standards on international project performance: Chinese contractors’ experience
• Interference Effect on Stationary Aerodynamic Performance between Parallel Bridges
• Influence of fracture geometry on bone healing under locking plate fixations: A comparison between oblique and transverse tibial fractures
• Computational modelling of bone fracture healing under partial weight-bearing exercise
• Flutter Characteristics of Thin Plate Sections for Aerodynamic Bridges
• The spatio-temporal mechanical environment of healthy and injured human cartilage during sustained activity and its role in cartilage damage
• Deterministic solutions for contact force generated by impact of windborne debris
• Use of static tests for predicting damage to cladding panels caused by storm debris
• Comparative performance of PPPs and traditional procurement projects in Indonesia
• A probabilistic study of ground motion simulation for Bangkok soil
• The relationship between interfragmentary movement and cell differentiation in early fracture healing under locking plate fixation
• Computational modeling of bone fracture healing by using the theory of porous media
• The role of impairment of mesenchymal stem cell function in osteoporotic bone fracture healing
• Monitoring the Dynamic Behavior of the Merlynston Creek Bridge Using Interferometric Radar Sensors and Finite Element Modeling
• Probabilistic modelling of Hertzian fracture of glass by flying objects impact in bad weather
• Comprehensive evaluation of aerodynamic performance of twin-box girder bridges with vertical stabilizers
• Contact forces generated by hailstone impact
• Blast studies on bridges - A state-of-the-art review
• An innovative procedure for estimating contact force during impact
• Computational simulation of the early stage of bone healing under different configurations of locking compression plates
• Time Evolution of Deformation in a Human Cartilage Under Cyclic Loading
• Disaster waste clean‑up system performance subject to time-dependent disaster waste accumulation
• Articular Cartilage Dynamics
• Computational simulation of mechanical microenvironment of early stage of bone healing under locking compression plate with dynamic locking screws
• Improving Design Performance by Alliance between Contractors and Designers in International Hydropower EPC Projects from the Perspective of Chinese Construction Companies
• The Role of Locking Plate Stiffness in Bone Fracture Healing Stabilized by Far Cortical Locking Technique
• Wind-induced nonlinear behaviors of twin-box girder bridges with various aerodynamic shapes
• Sensitivity analysis of geometrical parameters on the aerodynamic performance of closed-box girder bridges
• A note on Hunt and Crossley model with generalized visco-elastic damping
• Application of FRP Bolts in Monitoring the Internal Force of the Rocks Surrounding a Mine-Shield Tunnel
• Effect of interfacial transition zone on the transport of sulfate ions in concrete
• Dynamic behavior of Indonesian bridges using interferometric radar technology
• Health assessment of a pedestrian bridge deck using ground penetrating radar
• Qualitative analysis of the Occupational Health and Safety performance of Chinese international construction projects
• Life-Cycle Performance of a Bridge Subjected to Multiple Heavy Vehicle Impacts
• Risk Appraisal in Engineering Infrastructure Projects: Examination of Project Risks Using Probabilistic Analysis
• The transport of insulin-like growth factor through cartilage
• IGF uptake with competitive binding in articular cartilage
• A mathematical model for targeting chemicals to tissues by exploiting complex degradation
• On the role of diffusible binding partners in modulating the transport and concentration of proteins in tissues
• Estimation of response of plate structure subject to low veloctiy impact by a solid object
• Simplified analysis of low velocity impact actions on shallow domes
• Construction and biomechanical properties of polyaxial self-locking anatomical plate based on the geometry of distal tibia
• Effects of cyclic loading on the long-term deflection of prestressed concrete beams
• Building sustainable structures and reuse of building materials
• Contact forces generated by fallen debris
• Simple hand calculation method for estimating deflection generated by the low velocity impact of a solid object
• Role of chemical and mechanical stimuli in mediating bone fracture healing
• Economic risk analysis for sustainable urban development: Validation of framework and decision support technique
• Solute transport in cartilage undergoing cyclic deformation
• Evaluation of simplified methods of estimating beam responses to impact
• Solute transport in cyclic deformed heterogeneous articular cartilage
• Modeling the Insulin-Like Growth Factor System in Articular Cartilage
• Engineering reliability analysis in risk management framework: Development and application in infrastructure project
• Estimation of impact force generated by storm debris
• Early age concrete creep: Using model B3 prediction
• Responses of anchorage zones in cable-stayed bridges under blast loads
• Biomechanical environment of early stage of bone healing under biological internal fixation
• Financial risk analysis for engineering management: A framework development and testing
• Effect of construction sequence in the axial shortening behaviour of composite columns
• Effects of repeated loading on creep deflection of reinforced concrete beams
• Strength of glass under concentrated force
• A fully coupled poroelastic reactive-transport model of cartilage
• The effect of cyclic deformation and solute binding on solute transport in cartilage
• Effects of cyclic loading on the long-term deflection of prestressed concrete beams
• Impact analyses simplified by the two-degrees-of-freedom models
• Fundamentals of impact actions demonstrated by miniature experimentations
• Approximate solutions to impact of a spherical object on the surface of a flat steel plate
• Estimation of dynamic response of structural elements subject to blast and impact actions using a simple unified approach
• Integrated model of IGF-I mediated biosynthesis in a deformed articular cartilage
• Risk appraisal in engineering infrastructure projects: Examination of project risks using probabilistic analysis
• The transport of insulin-like growth factor through cartilage
• HOW TO GET INTERNATIONAL CONSTRUCTION PROJECTS DELIVERED ON TIME: FROM CHINESE CONTRACTORS’ PERSPECTIVE
• Behavior of Hybrid PET FRP Confined Concrete-Filled High-Strength Steel Tube Columns under Eccentric Compression
• Analytical Framework for Understanding the Differences between Technical Standards Originating from Various Regions to Improve International Hydropower Project Delivery
• Durability assessment of PEN/PET FRP composites based on accelerated aging in alkaline solution/seawater with different temperatures
• Large-rupture-strain (LRS) FRP-confined concrete in square stub columns: Effects of specimen size and assessments of existing models
• A Comparative Study on the Degradation of Alkali-Activated Slag/Fly Ash and Cement-Based Mortars in Phosphoric Acid
• Early Risk Warning of Highway Soft Rock Slope Group Using Fuzzy-Based Machine Learning
• Multiscale modelling of the seepage-induced failure of a soft rock slope
• Evaluation of superimposed bending behaviour of laminated channel beams in modular steel buildings subjected to lateral load
• Experiments on an ice ball impacting onto a rigid target
• MULTI-MODALITY ANALYSIS OF A 3D PRINTED BIOCOMPATIABLE POLYMER SCAFFOLD
• Improving Design by Partnering in Engineering–Procurement–Construction (EPC) Hydropower Projects: A Case Study of a Large-Scale Hydropower Project in China
• The effects of cyclic fluid pressure on time-dependent corrosion behaviour of offshore concrete caused by chloride ions
• Degradation of concrete in marine environment under coupled chloride and sulfate attack: A numerical and experimental study
• Evaluating uncertainties to deliver enhanced service performance in education PPPs: a hierarchical reliability framework
• Impact response of inclined self-weighted functionally graded porous beams reinforced by graphene platelets
• A microscale-based numerical model for investigating hygro-thermo-mechanical behaviour of 3D printed concrete at elevated temperatures
• Influence of variability and uncertainty in vertical and horizontal surface roughness on articular cartilage lubrication
• Percolation Threshold of Red-Bed Soft Rock during Damage and Destruction
• Developing a Framework for Dynamic Organizational Resilience Analysis in Prefabricated Construction Projects: A Project Life Cycle Perspective
• Indentation into an aluminium panel by the impact of a rigid spherical object
• Public-school infrastructure ageing and current challenges in maintenance
• Optimized Design of Piled Embankment Using a Multi-Effect Coupling Model on a Coastal Highway
• Soil and water conservation and ecological restoration on the slopes treated with new polymer composite materials
• Modeling consolidation of soft clay by developing a fractional differential constitutive model in conjunction with an intelligent displacement inversion method
• Application of a coupled hydro‐mechanical interface model in simulating uplifting problems
• Investigation on interfacial slipping response of laminated channel beams with bolt connections in modular steel buildings
• Machine learning-driven evaluation and optimisation of compression yielded FRP-reinforced concrete beam with T section
• Effects of TiO2-Modified RGO Composites on the Mechanical and Durability Properties of Ordinary Portland Cement Mortars
• Nano-cementitious composites modified with Graphene Oxide – a review
• Influence of muscle loading on early-stage bone fracture healing
• The effects of mechanical instability on PDGF mediated inflammatory response at early stage of fracture healing under diabetic condition
• Experimental fire performance assessment of a new type of prestressed composite circular precast concrete columns
• Performance of Compression Yielded FRP-Reinforced Concrete Beams with T Sections
• Osteochondral junction leakage and cartilage joint lubrication
• A numerical method to study the fiber orientation and distribution of fiber reinforced self-compacting concrete
• Strengthening RC square columns with UHP-ECC section curvilinearization and FRP confinement: Concept and axial compression tests
• Aerodynamic performance evaluation of steel-UHPC composite deck cable-stayed bridges with VIV countermeasures
• Role of moveable guide vane with various configurations in controlling the vortex-induced vibration of twin-box girder suspension bridges: An experimental investigation
• Development of numerical model-based machine learning algorithms for different healing stages of distal radius fracture healing
• Effects of vertical central stabilizers on nonlinear wind-induced stabilization of a closed-box girder suspension bridge with various aspect ratios
• New insights into the contribution of quartz powder byproduct from manufactured sand to the performance of cementitious materials
• An analytical approach for modelling contact forcing function of hailstone impact
• Thermal performance of CRTS Ⅱ slab track-bridge structure under extreme temperatures: Numerical simulation
• A Meso/Macroscale Theoretical Model for Investigating the Large Deformation of Soft Rock Tunnels Considering Creep and Anisotropic Effects
• Mars climate change research: Perspective of sulfur replacing carbon in Martian sedimentary rocks
• Computational Modelling for Managing Pathways to Cartilage Failure
• A novel plug-in self-locking inter-module connection for modular steel buildings
• Linking mesoscopic and macroscopic aspects of inclined self-weight sandwich beams with functionally graded porous cores under moving loads
• Indentation modelling of aluminium cladding panels subjected to hailstone impact
• Micro-meso-macroscale correlation mechanism of red-bed soft rocks failure within static water based on energy analysis
• A Reliability-Based Framework for Damage Accumulation Due to Multiple Earthquakes: A Case Study on Bridges
• Microscale failure analysis of the ultra-high-performance polypropylene fibre reinforced concrete panel subjected to high thermal loading induced by fire exposure
• FRP-Confined Concrete Columns with a Stress Reduction-Recovery Behavior: A State-of-the-art Review, Design Recommendations and Model Assessments
• Thermal response of the bridge supported longitudinal CRTS II slab track subject to diurnal temperature variation
• Nanotechnology in Construction for Circular Economy
• Nonlinear Wind-Induced Vibration Behaviors of Multi-tower Suspension Bridges Under Strong Wind Conditions
• Thermal Transfer Effects of CRTS II Slab Track Under Various Meteorological Conditions
• Harmonic Vibration of Inclined Porous Nanocomposite Beams
• Flexural Strains in a Toughened Glass Panel generated by Impact of an Ice Sphere
• Experimental study of strength characteristics of reinforced broken rock mass
• Experimental investigation of assembly-oriented steel column-beam connection with transverse reverse channels for prefabricated structures
• Depth camera-based model for studying the effects of muscle loading on distal radius fracture healing
• Functionally graded porous structures: Analyses, performances, and applications – A Review
• Effect of uncertain clinical conditions on the early healing and stability of distal radius fractures
• Characteristics and mechanism of the particle migration subject to the shear flow of concrete flow under pressure
• Changes in joint lubrication with the degree of meniscectomy and osteochondral junction integrity
• Behavior of hybrid FRP-concrete-steel double-skin tubular beams with ultra-high strength concrete and PBL shear connectors under bending
• Engineering reliability-based condition assessment for stay cables using non-destructive interferometric radar
• The impact of osteoporosis and diabetes on fracture healing under different loading conditions
• Deterministic Failure Prediction of Toughened Glass when Impacted by Ice
• Optimized Bridge Maintenance Strategies: A System Reliability–Based Approach to Enhancing Road Network Performance
• Life-cycle performance of aluminium cladding panels in resisting hailstorms
• How to improve the effects of knowledge governance on individual learning across projects: From the perspective of relational capital
• Enhanced acid resistance of ternary blended concrete composites transformed with graphene oxide for sewer structures
• Constitutive models of ultra-high performance concrete (UHPC) under ture tri-axial compression and an analysis-oriented model for FRP-confined UHPC
• New insight on particle migration of concrete under pumping based on X-ray computed tomography
• Rebar-free concrete construction: Concept, opportunities and challenges
• The Cumulative Effect of Gene-Gene and Gene-Environment Interactions on the Risk of Prostate Cancer in Chinese Men
• Ultralight metal foams
• A study of some relevant properties of concrete incorporating waste ceramic powder as a cement replacement agent
• Effect of hybrid fibres on mechanical behaviour of magnesium oxychloride cement-based composites
• Experimental investigation of the mechanical performance of novel rigid connections in prestressed circular composite precast concrete columns under cyclic lateral loading
• A probabilistic approach for assessing the mechanical performance of intertrochanteric fracture stabilized with proximal femoral nail antirotation
• The flexural mechanical response of a novel plug-in self-locking inter-module connection for modular steel buildings
• Mechanical performance analysis of double-block ballastless tracks in intercity railways under temperature and train loads
• Damage evolution of red-bed soft rock: Progressive change from mesotexture to macro-deformation
• Numerical-analytical investigation on bending performance of laminated beams in modular steel buildings
• Machine learning-based framework for predicting the fire-induced spalling in concrete tunnel linings
• Experimental and Theoretical Investigation of Initial Irreversible Critical Damage State of Red Mudstone
• Fast Fracture in Toughened Glass when Impacted Randomly by Ice
• Configuring Success: Unveiling Key Configurations for Enhanced Design Coordination in Hydropower Projects
• Using removable sensors in structural health monitoring: A Bayesian methodology for attachment-to-attachment uncertainty quantification
• Basic chemical composition combination rules and quantitative criterion of red beds
• Deterioration of fire resistance of ultra-high-performance polypropylene-fibre-reinforced concrete (UHPPFRC) under long-term acid rain corrosion action
• Impact of Access to Electricity and Socio-Economic Environment on Poverty Reduction: An Empirical Study on Myanmar
• Mechanical Performance and Microstructure Evolution of MgO-Doped High Volume GGBFS-based Engineered Cementitious Composites at Room and Elevated Temperatures
• Effect of hand-wrist exercises on distal radius fracture healing based on markerless motion capture system
• Understanding the coupled relationship between regional longevity and physical geographical environment in Hechi, Guangxi, China
• Hail impact damage modelling of polymeric core aluminium sandwich panels
• Effect of Metakaolin and Ground Granulated Blast Furnace Slag on the Performance of Hybrid Fibre-Reinforced Magnesium Oxychloride Cement-Based Composites
• Fragility Curves for Hail Resistance of Toughened Glass
• Fragility curves for hail resistance of toughened glass
• A hybrid forcasting model of temperature gradient in longitudinal slab tracks on bridge-subgrade transition zones
• A fully coupled depth-dependent corrosion model for reinforced concrete piles under marine environmental conditions
• Fire resistance and thermal performance of hybrid fibre-reinforced magnesium oxychloride cement-based composites
• Experimental and numerical investigation on the bending properties of laminated rectangular tube beams with interlocking plug-in plates in modular steel buildings
• To what extent can polycarboxylate superplasticizers enhance the dispersion characteristics of modified graphene oxide in cement? Insights from ultrasonication and high-shear mixing methods
• A case study of multifunctional solar chimney in tunnel